Kegco - 24" Wide Tap Black Digital Kegerator

Description

Digital Temperature Control

It's never been easier to set and verify your keg cooler's internal temperature than with our push button controls and digital temperature display. Instead of a manual dial to adjust the temperature, these units have up and down buttons that give you a more precise control, and the clear LED display can be set to show either Fahrenheit or Celsius.

Fan-Forced Cooling for Super Cool Temperatures

K309 Beer Refrigerators feature fan forced cooling, which provides even cooling throughout the unit and gives you one of the coldest temperature ranges of any beer refrigerator on the market - as low as 32 degrees!

Large Interior

This beer keg refrigerator has a spacious interior that easily accommodates any full size keg (including Coors kegs, Miller kegs, and rubber kegs!), as well as up to two 5 gallon D system kegs or up to three 5 gallon Cornelius ball lock home-brew kegs. This large capacity gives you the option to dispense more than one beer keg at a time.

Deep Chill Function

If you have ever needed to quickly cool a warm beer keg, this Deep Chill function will be perfect for you! Press the convenient Deep Chill button, and the compressor will work continuously for 24 hours to get your keg to the desired temperature. Simply press the button again, and the unit will return to it's normal operation.*

Converts to a Refrigerator with 2 Shelves

This versatile keg dispenser does more than just dispense delicious beverages. If you need extra refrigerated storage when not dispensing beer, this unit can be converted to an all-refrigerator using the 2 included adjustable shelves. These shelves can be spaced far enough apart to hold gallon jugs or 2-liter bottles, and you can even store wine thanks to the wide temperature range.

Locking Casters Provide Mobility

Take the party from the bar to the patio with these easy-roll casters! One your beer cooler is in position, they can be locked so that your cooler won't move again until you want it to.

Highlights

• Can be converted into an all-refrigerator using the 2 included adjustable shelves for additional refrigerated storage
• Comes complete with a 1-tap keg beer dispense system that features 100% stainless steel contact
• Features digital temperature control and fan forced cooling for one of the largest temperature ranges on the market (32-75°F)
• Spacious interior easily accommodates one 1/2-barrel or 1/4-barrel, two 1/6-barrels, or three home brew kegs
• Includes chrome guardrail, easy roll locking casters, and dishwasher safe removable built-in drip tray
  
  Dimensions: 33.25" H x 24" W x 25" D

Features

• MDK-309B-01 Keg Dispenser and Single-Faucet Draft Beer Dispense System
• Includes a brand new 5 lb. Aluminum CO₂ Tank
  This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill.
• Includes Commercial Grade Dual Gauge CO₂ Regulator
  The regulator works with any CO₂ tank with a CGA-320 valve and measures PSI, as well as the volume of the CO₂ gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg.
• Includes 5 feet of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
  This standard length 5 foot 5/16" I.D. blue air/CO₂ tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. The air line assembly comes with two plastic snap clamps with a reusable clamp design.
• Includes D system lever handle keg coupler that can tap all domestic kegs
  This commercial grade lever handle keg coupler works with all American "D" system Sankey kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg, simply pull out and then down on the lever handle.
• Includes a 3" Diameter Polished Stainless Steel Draft Tower
  This NSF-approved tower is a 3" diameter single faucet metal draft tower made of polished stainless steel and includes 5 feet of 3/16" I.D. clear beer tubing. The faucet, shank, and fittings are all made of 304 grade stainless steel for the ultimate in sanitation. This tower is mounted using the gasket and four screws that are included.
• Converts to refrigerator 2 full-width wire shelves
• Large enough to hold all full size kegs (Including Coors, Miller and many additional brands)
• Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal) and 1/6 barrels (5gal)
• Matte black cabinet and door
• Digital temperature control keeps temperature in range of 32°F-75°F
• Maximum Ambient Temperature: 100 degrees Fahrenheit
• Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
• A perfect option for dispensing beer, soda, kombucha or wine
• Deep Chill function to quickly cool down warm keg
• Easy roll casters for mobility
• Removable built-in drip tray with grill to collect spills
• Chrome guard rail to protect your mugs and glasses from sliding off
• Stainless steel interior floor mat for long lasting durability and easy glide of beer keg
• 25% more energy efficient design saves you money each month!
• Plugs into standard home outlet
• UL Listed

Specification

Warranty

• 1 Year Parts and Labor
• 5 Years on Compressor (parts only)